TRAM D201
-
De_Wildfire
- Donor
- Posts: 912
- Joined: June 14th, 2009, 7:46 pm
- Handle: De_Wildfire
- Real Name: Greg
- Antenna: Imax 2000. Hex Beam, G5RV dipole, Jpole(UHF/VHF) Austin Suburban Tri Band (UHF/VHF)
- Radio: Washington, Tram D201, Tram D64, Robyn 520D, Cobra 139XLR, Elecraft K3S, Kenwood 590S, Yaesu FTM 400DR, Alinco DR-235, ADI-146
- Contact:
TRAM D201
Has anyone worked on a TRAM D201? The meter needle is pegged all the way to the left below zero when I turn it on and then it goes back to zero when I turn it off. I tried tinkering with the meter adjustment in the far right back of the radio but it doesn't do any good. Any ideas to a fix?
-
Rodehard75
- NEW DUCK
- Posts: 0
- Joined: September 2nd, 2024, 5:02 pm
- Handle: Ace One
- Real Name: Enis
- Antenna: Starduster
- Radio: Rci-29
- Contact:
Re: TRAM D201
I had the same problem on a D201. changed either a 6GH8A or a 12AX7A, its been so long ago I would have to look again, but its one of those tubes. After I changed it it went to working normal again. If I find out for sure I will let you know.
-
De_Wildfire
- Donor
- Posts: 912
- Joined: June 14th, 2009, 7:46 pm
- Handle: De_Wildfire
- Real Name: Greg
- Antenna: Imax 2000. Hex Beam, G5RV dipole, Jpole(UHF/VHF) Austin Suburban Tri Band (UHF/VHF)
- Radio: Washington, Tram D201, Tram D64, Robyn 520D, Cobra 139XLR, Elecraft K3S, Kenwood 590S, Yaesu FTM 400DR, Alinco DR-235, ADI-146
- Contact:
Re: TRAM D201
Rodehard75...Thanks for the response and for narrowing it down for me to the tubes. Yes, please let me know. Thanks
