General Radio

This forum is dedicated to discussions about tube radios and tube amplifiers.
Post Reply
User avatar
crazy_cooter
Skipshooter
Skipshooter
Posts: 397
Joined: June 15th, 2011, 8:30 am
Real Name: Tyler Sanders
Antenna: Penetrator 500
Radio: Browning Mark III
Contact:

General Radio

#326410

Post by crazy_cooter »

Hey can anyone give me some info on the old General radios? I recently talked to a guy in New Hampshire, and he was talking on one. It sounded phenominal, like broadcast audio quality. All he ran for a mike was a non amplified D-104. I was blown away! I know nothing about those radios and want to learn some more. I may be on the hunt for one sometime soon.
"TUBES GLOW, AND TRANSISTORS BLOW!"
Image
User avatar
Night Crawler
Wordwide & Qualified
Wordwide & Qualified
Posts: 3,836
Joined: May 15th, 2007, 9:03 am
Contact:

Re: General Radio

#326413

Post by Night Crawler »

They were well designed radios what do you want to know about them?
User avatar
crazy_cooter
Skipshooter
Skipshooter
Posts: 397
Joined: June 15th, 2011, 8:30 am
Real Name: Tyler Sanders
Antenna: Penetrator 500
Radio: Browning Mark III
Contact:

Re: General Radio

#326414

Post by crazy_cooter »

Were they strictly a transmitter? Were they a small radio, big, really big? VFO or crystal selector for channels? Sorry I'm asking dumb questions, but I'm really curious about these. What did they usually do for power?
"TUBES GLOW, AND TRANSISTORS BLOW!"
Image
User avatar
Night Crawler
Wordwide & Qualified
Wordwide & Qualified
Posts: 3,836
Joined: May 15th, 2007, 9:03 am
Contact:

Re: General Radio

#326425

Post by Night Crawler »

The one I had was a General MC11 if I remeber correctly it was a 23 channel transceiver using a crystal mixing circuit and was all tube and about the size of your Browning receiver or transmitter.

The speech amplifier was a 12AX7 can't remember what the modulator tubes were but it used a phase inverter driving two in push-pull.
The final was a 6GE5 which was capable of 20 watts input if the screen resistor was changed to a lower value which is why at the time that rig was very popular.
I remember the receiver used the new type Nuvistor tubes in the front end.

General Radio & Telephone was a manufacturer of business band radios at the time and the cb line was well designed and built.
I think the cb's used the same circuit as their business band radios that operated above 30mhz only the voltage on the screen of the final amplifier tube was reduced to keep within the 5 watt input limit.
Last edited by Night Crawler on August 13th, 2011, 1:22 pm, edited 1 time in total.
User avatar
crazy_cooter
Skipshooter
Skipshooter
Posts: 397
Joined: June 15th, 2011, 8:30 am
Real Name: Tyler Sanders
Antenna: Penetrator 500
Radio: Browning Mark III
Contact:

Re: General Radio

#326426

Post by crazy_cooter »

Thanks for the info Crawler. Is it true they had built radios for the military as well? Someone once told me this, but I can't confirm that it is correct.
"TUBES GLOW, AND TRANSISTORS BLOW!"
Image
User avatar
Nagant
Wordwide & Qualified
Wordwide & Qualified
Posts: 1,338
Joined: December 31st, 2009, 4:15 am
Real Name: Paul
Antenna: M104C, V-Quad
Radio: To Many To List
Contact:

Re: General Radio

#326607

Post by Nagant »

http://www.cbtricks.com/radio ... /index.htm

Google will give more info as well as pictures and some videos. They are sough after radios and tend to bring decent prices online.
User avatar
355kylake
6 PILL USER
6 PILL USER
Posts: 82
Joined: July 21st, 2011, 4:06 pm
Real Name: rick binkley
Antenna: Antron A-99
Radio: Galaxy DX66V
Contact:

Re: General Radio

#326609

Post by 355kylake »

here is a little info from the radio museum very well built radio for the time. http://www.radiomuseum.org/ds ... y_id=10133

355kylake
Post Reply