I want to replace the Schottky Diodes & 2SC2999 in my Galaxy DX88.
My problem is the instructions found on the internet state you need to replace 4 diodes and 1 NPN transistor (TR18) my PCB EPT360014C schematic shows TR18 (the 1st RX mixer) is a N-JFET (J310).
I did this mod on my Cobra 148GTL (old model) and it worked great.
Am I looking at the wrong transistor?
Larry
RX mode to galaxy DX88
- SPUDGUN
- Mud-Duck Sr.
- Posts: 7
- Joined: April 26th, 2014, 8:07 pm
- Handle: g man
- Real Name: LARRY
- Radio: Cobra 148 GTL
- Contact:
- sonoma
- Donor
- Posts: 1,459
- Joined: April 2nd, 2006, 3:10 pm
- Handle: sonoma
- Real Name: sonoma
- Radio: President Washington
- Contact:
Re: RX mode to galaxy DX88
my list shows on the 3600 board to be tr17 diodes are d1 d2 and d23 and d24. this is for the 88 and other radios that use the same board
- SPUDGUN
- Mud-Duck Sr.
- Posts: 7
- Joined: April 26th, 2014, 8:07 pm
- Handle: g man
- Real Name: LARRY
- Radio: Cobra 148 GTL
- Contact:
Re: RX mode to galaxy DX88
Thanks, I think the link I found on the internet may have listed the diodes and transistors wrong.
It didnt seem right when I looked at it.
Thanks for your input..
Larry
It didnt seem right when I looked at it.
Thanks for your input..
Larry