Moderator: JR Moderator
- NEW DUCK
- Posts: 3
- Joined: Saturday, 05 August 2017, 15:58 PM
- Name: Jeffrey
- Cell Phone: 4232857752
I'm a full timer in a 25' travel trailer since I travel a lot for work. Both of my pickups have radios installed, but I'm one that loves to sit in a shack and work the skip when it's rolling in. There lies my only problem, figuring out the best antenna solution for a trailer that has to be able to move and isn't a full base type antenna.
In the past when I was living in an apartment, I would make a dipole out of two mobile antennas and run it off of my balcony, for what it was it worked generally well. I've ran wire antennas, even made my own to experiment with. I'm however stumped trying to figure out how to mount, and what I should run on this brand new trailer. Being as I have 12V power in here already, and I have a good spot for my radio, I'm going with a mobile mounted in the entertainment center, because well, it is entertainment after all.
I've thought about the Maco BA-1, however too long for what I'm looking for. I refuse to run the little 3' no ground antennas, I'll be pushing a "little" power at some point in the near future.
Coax I have covered as I am a former tower climber for AM/FM broadcasters, I've got around 200' of LDF4-50A set aside to use on this project, and all the N type connectors I could ever dream of needing to convert the entire rig over as well. It's just the antenna, with so many ideas it's difficult to decide which option would be best. If I were staying in one place for more than a month at a time, I would run a pushup pole with a nice base antenna on it, but most of the parks I pull into aren't too friendly about large antennas from what I've seen. With all this said, and sorry about the rambling, if anyone has any input, please feel free to help a guy out! Stealthy installs that have the ability to talk locally as well as work skip when the conditions are right is my end goal, preferably something other than wire antennas and somewhat of a lower profile. In case anyone needs info on the trailer itself, I got a killer deal on a Puma 25RBSS, so unfortunately it's not a metal body trailer.
- Posts: 7217
- Joined: Saturday, 12 June 2010, 19:05 PM
- Logged in via: iPhone
- Radio: Uniden Washington
- Antenna: Avanti Sigma II
- Name: Greg
- Location: Baltimore, MD
"321, the Middle of Maryland"
23 AM "WORLD WIDE" 38 LSB
Strong Supporter of America's Original Homeland Security Act
The Second Amendment
Texas Ranger TR-696FD1C
Avanti Sigma II
Homemade Full Wave Loop
Homemade 1/2 wave Dipole
Hustler 102" SS Whip and Hustler Ball Mount
- Scipio Kid
- Posts: 208
- Joined: Monday, 18 July 2016, 7:31 AM
- Radio: Washington / Connex
- Antenna: Dipole HM
- Name: Scipio
- Location: Out West in Herriman
- 443 Arizona
- Wordwide & Qualified
- Posts: 657
- Joined: Thursday, 29 April 2010, 13:22 PM
- Radio: madison on 5/8 wave
- Location: phoenix, arizona
i thought of a whip on a 20' pipe/tube, on a pivot bracket, so that it will lay down and basically fit right up next to the raingutter.
a canti-lever mount,(pivot point about 2' from end and then another little mount to hold the end in position) that would give it stability.
a custom made ant. would be feasible and easily attached-detached.
i think a ground wire could be run pretty easily too. give it that extra uumph.
camo paint , an off-white-ish blue, that'll get the trailer park queens to like'n it.
alot of these traveltrailer guys are sporting flagpoles,,,, it wouldn't be to hard to imagine an antenna on top of that.
if you wanna get totally overboard in the game, just mount a crank-up that welds to your bumper, can fold it over too if needed.
i have seen a picture of that, looked like a 30' + ,was on a jobsite office trailer.
you could put an official looking sign on it "satellite scratcher #443"
Who is online
Users browsing this forum: No registered users and 1 guest