Behringer 1202FX Mixer

[DQ333]

Hi i am new to the Forum. I Have a Behringer 1202FX Mixer Board and i am wanting to hook it up to my radio and was wondering if anyone had any info or diagraphms of how to go about properly hooking it up inline. I will appreciate any info that someone can give me. Thanks a bunch...

[dodgem]

Are you trying to run the microphone through the mixer to control your sound at transmit? I have one of my old studio recording mics and I running through my studio effects processor and then into the base mic. But, if that's your goal, you could replace the "processor" with the mixer. Behringer makes good stuff and it is low budget, but, it works just fine for most applications. If you have any questions, give me a shout. I have run studio and live sound on for bands for years.

[Cj1]

i'm curious about this too, as i would like to use this on my president lincoln. how would i hook this up?

[DQ333]

Well i officially got it hooked up and got everything running. I also added an audio compressor inline as well. Got a lot of locals up in my area that say this radio is the cleanest and greatest radio that they have ever heard. I will post pics as soon as i get a chance too.

[Cj1]

Well i officially got it hooked up and got everything running. I also added an audio compressor inline as well. Got a lot of locals up in my area that say this radio is the cleanest and greatest radio that they have ever heard. I will post pics as soon as i get a chance too.

please do.. i'm very interested

[madsage]

Yeah the compressors are the best effect, a little reverb is nice too.
And a parabolic EQ goes a long way.

There is also some very cool software that can provide all this stuff through your PC.
You will need a decent sound card however and a mic that has good feq responce.

All this stuff will raise your average power output and sound killer when adjusted right.
Do some searching on google for eSSB. Hope that helps.


933 Arizona

[kc4eoe]

Glad that project turned out well for you. The Hams have been using a W2IHY (google it) speech processor/EQ for a long time now and some of those guys sound bodacious on the HF bands. I have been considering emailing or calling the guy to see if he would be interested in producing a simple EQ for CB's. He could sure make a lot of money doing it. A little 4 band EQ with mounting bracket for mobile would be sweet. Anyway, just a thought.

[tiny15]

Check out Heil Sound web site on using Berhinger mixer.

[Cj1]

Can anyone show me the Proper way, i just picked this bad boy up!

[ironsheik]

any one know where any sites are or some info to compleat this task...i have a board a mic and im pretty handy but have no clue how to go about it...i know what i have been told but i would love some one who could put it in writing or maybe draw up what i need..thanks

[tiny15]

Go to Bob Heil's web site.