Image

Davemade m400

This is the place to ask questions about linear amplifiers, or power supplies

Moderator: JR Moderator

User avatar
smoke blower
Skipshooter
Skipshooter
Posts: 352
Joined: Sunday, 26 June 2011, 17:05 PM

Davemade m400

Post by smoke blower » Thursday, 13 April 2017, 10:43 AM

I have a davemade 5 transistor amp and I wanted to add ssb to it can anyone tell me the best way to do this.

[ Post made via Android ] Image




User avatar
MDYoungblood
Moderator
Moderator
Posts: 7507
Joined: Saturday, 12 June 2010, 19:05 PM
Logged in via: iPad
Radio: Uniden Washington
Antenna: Avanti Sigma II
Name: Greg
Location: Baltimore, MD
Contact:

Re: Davemade m400

Post by MDYoungblood » Friday, 14 April 2017, 11:09 AM

You will need to bias the transistors, add a cap to the relay and a switch, that is just to start, I'm pretty sure there is more, I'll let the amp guys tell you what else.

3's

Greg


"321, the Middle of Maryland"

23 AM "WORLD WIDE" 38 LSB

Strong Supporter of America's Original Homeland Security Act
The Second Amendment



Official Moderator - CBRT Complaint Department

User avatar
smoke blower
Skipshooter
Skipshooter
Posts: 352
Joined: Sunday, 26 June 2011, 17:05 PM

Re: Davemade m400

Post by smoke blower » Friday, 14 April 2017, 14:20 PM

Ok thank you Mdyoungblood

[ Post made via Android ] Image



User avatar
Crusher
Donor
Donor
Posts: 945
Joined: Saturday, 29 July 2006, 17:39 PM
Location: The Bluegrass

Re: Davemade m400

Post by Crusher » Friday, 14 April 2017, 14:54 PM

Biasing is a bit more complicated. I don't do the resistor and diode mod as it's not a good way of doing it. The delay is easy.

[ Post made via iPad ] Image



User avatar
smoke blower
Skipshooter
Skipshooter
Posts: 352
Joined: Sunday, 26 June 2011, 17:05 PM

Re: Davemade m400

Post by smoke blower » Monday, 24 April 2017, 15:29 PM

I figured that is was best to just leave it alone I don't know anything about amps

[ Post made via Android ] Image




Post Reply Previous topicNext topic